Basic Playback; Playing Audio Fi Les Stored On Pcs Or Other Components; Listening To The Internet Radio - Pioneer N-50-K Manual De Instrucciones

Basic playback

Here are the basic instructions for playing a source (such as the PC).
1
/I STANDBY/ON
STANDBY PURE AUDIO Hi-Bit32
iPod/USB
5V 2.1A
2 B
N-50
NETWORK AUDIO PLAYER
FUNCTION  
 
Playback with NETWORK feature
This unit is equipped with the LAN terminal
and you can enjoy the following features by
connecting your components to these terminals.
• Playback the music fi les stored in PCs
• Listening to Internet radio stations
Playing audio fi les stored on PCs or
other components
STANDBY/ON DISPLAY
INTERNET MUSIC
iPod RADIO SERVER
1
USB Bluetooth Air Jam
DIG IN USB DIG IN 1 DIG IN 2
1 2 3
HOME MENU
4 5 6
PURE AUDIO
7 8 9
CLEAR 0 ENTER
1
Press MUSIC SERVER to select Music
Server as the input source.
• When no sever is available to play, "Empty"
will be displayed.
4
En
STANDBY/ON DISPLAY
INTERNET MUSIC
iPod RADIO SERVER
USB Bluetooth Air Jam
2
DIG IN USB DIG IN 1 DIG IN 2
1 2 3
4 5 6
7 8 9
CLEAR 0 ENTER

  B
SHUFFLE REPEAT

SETUP SOUND
ENTER
A
HOME MENU RETURN
PURE AUDIO Hi-Bit 32
4
NETWORK AUDIO PLAYER
2
Use  to select the server that the fi le
you want to play is stored on, then press
ENTER.
The folders/fi les stored on the server are shown
on the display.
3
Use  to select the fi le you want to
play, then press ENTER.
Playback starts.
• Some of
for basic playback of music fi les stored on
components on the network.

  B
SHUFFLE REPEAT

A
SETUP SOUND
2
ENTER
3
RETURN
Hi-Bit 32
1
Switch on your system components and this unit.
Start by switching on the playback component, then this unit (press /I STANDBY/
ON button on the front panel).
• The unit turns on. The button's central power indicator will fl ash slowly.
About twenty seconds after turning on the power, the following screen appears.
About one minute is required between turning the power on and completion of
startup.
• When you use the unit for the fi rst time, the following screen will automatically
appear after the screen above. Use i/j to select the menu language of this unit, then
press ENTER.
2
Press input function buttons to select the input function you want to play.
• The input of this unit will switch over, and you will be able to operate other
components using the remote control.
• The input source can also be selected by using the front panel FUNCTION button.
In this case, the remote control won't switch operational modes.
3
Start playback of your system components.
4
Enjoy a variety of sounds. (N-50 only)
 PURE AUDIO 
• The PURE AUDIO mode allows audio signals to be played via the shortest playback
circuit without passing through the DSP , thus reducing noise and producing
playback sound with greatest fi delity to the original.
 Hi-Bit 32 
• Creates a wider dynamic range with digital sources. Smoother, more delicate
musical expression can be achieved by requantizing 16 bit to 24 bit audio signals to
32 bit.
and buttons can be used
A
B
Language
English
Français
Deutsch
Nederlands

Listening to the internet radio


STANDBY/ON
DISPLAY
SHUFFLE
INTERNET MUSIC
iPod RADIO SERVER
1
USB Bluetooth Air Jam
SETUP
DIG IN USB DIG IN 1 DIG IN 2
1 2 3
HOME MENU
4 5 6
PURE AUDIO
7 8 9
CLEAR 0 ENTER
1
Press INTERNET RADIO to select Internet
Radio as the input source.
2
Use  to select Find Net Radio, then
press ENTER.
3
Use  to select the station, then press
ENTER.


REPEAT

SOUND
2
ENTER
3
RETURN
Hi-Bit 32