Before You Start - Elinchrom ELB 500 HEAD Manual De Funcionamiento

User Manual
Flash tube plug-in, user
replaceable
Umbrella fitting
Tilt head adapter for
tripods
Dimensions (LxWxH)
cm / inches
Weight in kg / lbs, head
with 2.5m cable
Supplied with
EN

BEFORE YOU START

• Connect the flash cable with the security locking ring to the
power pack.
• Ensure that the power pack is switched OFF.
• Adapt the reflectors or accessories, which are required for
the shoot.
• Ensure that flash cable connections are secured against
moister and dust. Do not use in wet / humid conditions.
• Power pack outlets not in use must be protected with the
security covers.
• Check all connections again; the cable must be locked with
the security ring and then switch on the unit.
4
EL article code: 24090
Centered 7 mm fitting
5/8" standard
16 x 9 x 8
/ 6.3 x 3.5 x 3.1
0.61 + 0.05 with cap /
1.34 + 0.11 lbs with cap
2.5 m cable, flashtube, LED
modelling lamp, protective cap