TECshow BAM 10A UHF Manual De Usuario página 4

Operating determinations
Power
The PA system can be operated with 115/230 V, 50/60 Hz
mains voltage. The wireless microphones operate with two
1,5 V AA batteries and the IR remote control with a CR2025
button cell. The devices were designed for indoor use only.
Public and Industrial Use
Operating an amplification system in public or industrial ar-
eas, a series of safety instructions have to be followed that
this manual can only give in part. The operator must there-
fore inform himself on the current safety instructions and
consider them.
Maximum Power
The maximum powe of the PA system must never be exceed-
ed. When operating the speaker system, please make sure
that the loudspeakers always sound well.
When distortions cab be heard, either the amplifier or the
loudspeaker is overloaded. Overloads can quickly lead to
amplifire or speaker damage. In order to avoid damage,
please reduce the volume immediately when distortions can
be heard. When speakers systems are destroyed by overload,
the guarantee becomes void.
Ambient Conditions
This device must never be operated or stockpiled in sur-
roundings where splash water, rain, moisture or fog may
harm the device. Moisture or very high humidity can reduce
the insulation and lead to mortal electrical shocks. The am-
bient temperature must always be between -5º C and +45º
C. Keep away from direct insulation (particularly in cars) and
heaters. The relative humidity must not exceed 50% with an
ambient temperature of 45º C. This device must only be op-
erated in an altitude between -20 and 2000 m over NN. When
using smoke machines, make sure that the device is never
exposed to the direct smoke jet and is installed in a distance
of 0.5 meters between smoke machine and device.
Installation
Do not shake the device. Avoid brute force when installing or
operating the device. When choosing the installation spot,
please make sure that the device is not exposed to extreme
heat, moisture or dust. There should not be any cables lying
around. You endanger your own and the safety of others!
This speaker system must only be installed at a solid, plane,
BAM 10A UHF
ENGLISH VERSION
anti-slip, vibration-free, oscillation-free and fire-resistant lo-
cation. Operate the device only after having familiarized with
its functions. Do not permit operation by persons not quali-
fied for operating the device. Most damages are the result of
unprofessional operation!
Transport
Please use the original packaging if the device is to be
transported.
Cleaning
Never use solvents or aggressive detergents in order to clean
the device! Rather use a soft and damp cloth.
Serial Barcode
Never remove the serial barcode from the device as this
would make the guarantee void.
Modifications and Guarantee
please consider that unauthorized modifications on the
speaker system are forbidden due to safety reasons! If this
speaker system will be operated in any way different to the
one described in this manual, the product may suffer dam-
ages and the guarante becomes void. Furthemore, any other
operation way lead to dangers like crashes, hearing loss etc.
p. 4