TECshow BAM 10A UHF Manual De Usuario página 5

Operating elements & connections
1 – Lock
2 – Microphone/line input
Combo input (XLR/6.3 mm jack) for connecting a microphone
or an audio unit with mono line output, for each channel 1 to 4.
3 – Input selector switch
Switches the channels 1 to 4 from microfone input to line input .
4 – Tone controls
Controls for the high range (TREBLE) and the low range
(BASS), for each channel 1 to 4.
BAM 10A UHF
ENGLISH VERSION
5 – Effect controls
Determines the level at which the channel signal is fed to the
internal effect processor, for each channel 1 to 4.
6 – Level controls
To mix the channel signal to the master signal, for each chan-
nel 1 to 4.
7 – Clip indication
Lights red in case of overload, for each channel 1 to 4.
8 – Antenna input
p. 5