miniland baby digimonitor 1.8 Manual De Instrucciones página 13

monitor ON. When the monitor is turn on, the screen
will display the welcome screen and the power LED
(2) will illuminate green to indicate the unit is ON.
To turn it OFF press and hold the Power button (10)
again.
If for some reason your monitor blocks, press and
hold the Power button (10) until the unit turns off.
5.2.1.2. CAMERA:
To turn the camera on or off, keep the Power button
(III) pressed in for two seconds. The ON/link LED (IX)
will go on and off depending on whether you turn the
unit on or off.
When you have installed the camera and turned it
on, you can see the images and listen to the sounds
captured in your baby's room via the monitor.
5.2.2. MONITOR VOLUME
Press the UP or DOWN
bar will pop up. Then, press the UP key
key to select the desired volume level from level 0
~ 8. (The default volume level setting is level 4).
You may exit the function in the following manner:
1. Press the Menu/Back key
2. Do not touch the monitor for 15 seconds.
5.2.3. MONITOR BRIGHTNESS
Press the LEFT key and the brightness bar will pop
up. Then, press the LEFT
select the desired brightness level from level 1 ~ 8.
(The default volume level setting is level 4).
You may exit the function in the following manner:
1. Press the Menu/Back key
2. Do not touch the monitor for 15 seconds.
5.2.4. TALKING TO THE BABY
You may talk to your baby from the parents' unit (for
example, to calm it down and so it understands you'll
be with it in a moment) or to your partner (if he or she
is in the baby's room).
Press the Talk to the baby button (11), keep it pressed
in and talk in front of the monitor. A microphone icon
(H) will be displayed in the middle of the LCD Screen
while this function is working. Release the button
when you have finished talking to listen to the sound
from the baby's room again.
Bear in mind that you can't listen to your baby whilst
you're talking to it; to listen to it, you will have to stop
pressing this button.
5.2.5. DIGITAL ZOOM
You may increase the size of the image viewed,
carrying out a zoom.
Press the Nav RIGHT
zoom function. Once we are in this mode, we will be
able to move through the screen with the Navigation
Buttons of the monitor (UP
, LEFT ).
Zoom icon (C) will be displayed at the top of the LCD
screen.
To exit the zoom function you can:
1. Press the Menu/Back key
2. Don't touch the monitor in 15 seconds.
5.2.6. INFRARED NIGHT VISION (AUTOMATIC)
The infrared night vision function allows the camera to
keys and the volume
or DOWN
.
key or RIGHT
.
& Zoom key (7) to access the
, DOWN , RIGHT
pick up images of your baby or the monitored area in
dark or low light conditions.
In this mode, only black and white images will be
displayed on the monitor and only objects located less
than 2 meters away can be seen.
The camera constantly monitors the light level and
automatically changes to infrared mode when there is
insufficient light for normal vision.
Note: The light sensor (II) is located at the top of
the camera. Take care not to cover the sensor with
any object to prevent the camera from entering night
mode when there is light in the room.
5.2.7. OUT OF RANGE WARNING
If the monitor is located at a distance away from
the camera which is greater than that allowed (see
the technical characteristics), the on/link LED of the
camera (IX) will flash in red. On the monitor, the
welcome screen and the out of range symbol on the
top left corner of the screen will appear. In addition
a beep sound will be heard every 12 seconds as an
advice that both units are not communicating.
Bring the monitor closer to the camera to see the
image correctly again.
5.2.8. MAIN MENU
Press the Menu/Back key
key to
to access the main menu in order to set the main
functions and features of your baby monitor.
5.2.8.1. STANDBY MODE
With the Standby mode you can choose the maximum
time the monitor image remains active (1, 3 or 5
minutes); after this time the image disappears but the
sound continues to be heard in order to save energy.
To reactivate the image, just press any key.
To activate this mode you should:
1. Press the Menu/Back
pop up.
2. Press UP
icon then press
3. Press UP
OFF/1min/3min/5min.
4. Press
5. Press the Menu/Back
screen.
Note: If the device is in Standby mode and you do
not wish to wait 1, 3 or 5 minutes for the screen to
turn itself off, press the ON button (10) to turn it on
immediately.
5.2.8.2. VOX MODE
This mode allows you to control the sound activation
of your baby monitor. If you activate the
VOX mode on the monitor and there is no sound
around the camera, it stops transmitting. The monitor
screen turns off when the camera is not transmitting.
When the camera detects any sound it will start
transmitting the signal to the monitor again.
To disable this feature and see the area monitored
continuously, turn off the VOX mode on the monitor.
· VOX mode OFF: The camera transmits continuously,
13
key and the menu will
or DOWN key to select standby
key enter into the sub-menu.
or DOWN key to select the option
key to save the setting.
key to return to the main
ENGLISH
on your monitor