Chlorine Stabilizer Information; Aproximate Pounds And Kilograms Of Stabilizer Needed To Obtain 50 Ppm - Nature2 Fusion Inground Manual De Instalación Y Funcionamiento

4.6 Chlorine Stabilizer Information

Table 1.

Aproximate Pounds and Kilograms of Stabilizer Needed to Obtain 50 ppm

Current
Cyanuric
10,000 gal
Acid Level -
(38,000 L)
ppm
0 4.2 lbs
(1.9 kg)
10 3.4 lbs
(1.5 kg)
20 2.5 lbs
(1.1 kg)
30 1.7 lbs
(0.8 kg)
40 0.8 lbs
(0.4 kg)
NOTE The above chart is for general reference only. The recommended stabilizer reading is between 10 - 50 ppm
and will vary dependent on geographic climate. Warm, sunny climates will require a stabilizer reading at the
higher end of the given range. Consult your local service representative for your optimum level. Always add
stabilizer according to manufacturer's instructions. It is not necessary to add stabilizer for indoor pools.
It is important to note that certain materials used in and around swimming pools and spas may not be compatible
with chemicals commonly used to purify pool and spa water (e.g. acids, chlorine, salt, stabilizers, etc.).
As such, Zodiac Pool Systems, Inc. does not warrant or guarantee that the chlorinated water generated by the
Nature Fusion will not damage or destroy certain types of plants, decking, coping and other materials in and
2
around your pool and/or spa. Before selecting materials to be used in and around your pool and/or spa, please
discuss all options with your contractor to assess the compatibility of such materials and chemicals.
Some helpful considerations may include:
• Choosing plants that can withstand splash out of pool water containing chlorine and/or salt and other water
purifi cation chemicals.
• All metal components used in and around a pool should be of a high grade, quality stainless steel.
• Careful selection of masonry products. The porosity and hardness of natural stones varies greatly. Therefore we
recommend you consult with your builder or stone contractor on the best choice for stone materials around your
pool or spa.
• Sealing all masonry products. Professionals in the stone industry specify that even natural stone, especially when
used outdoors, be sealed to prevent weathering, staining, and premature degradation. Consult with your stone or
deck contractor for the proper sealer for the masonry products you have selected to use around your pool or spa.
• For the optimal results, sealers should be reapplied on a regular basis. Reapply the protective sealer on a
schedule per the manufacturer's instructions.
Nature 2® Fusion Inground Installation and Operation Manual
Gallons and (Liters) of Pool/Spa Water
15,000 gal 20,000 gal
(57,000 L) (76,000 L)
6.3 lbs 8.4 lbs
(2.9 kg) (3.8 kg)
5.1 lbs 6.7 lbs
(2.3 kg) (3.1 kg)
3.8 lbs 5.1 lbs
(1.7 kg) (2.3 kg)
2.5 lbs 3.4 lbs
(1.2 kg) (1.5 kg)
1.3 lbs 1.7 lbs
(0.6 kg) (0.8 kg)
25,000 gal 30,000 gal
(95,000 L) (113,000 L)
10.5 lbs 12.6 lbs
(4.8 kg) (5.7 kg)
8.4 lbs 10.1 lbs
(3.8 kg) (4.6 kg)
6.3 lbs 7.6 lbs
(2.9 kg) (3.4 kg)
4.2 lbs 5.1 lbs
(1.9 kg) (2.3 kg)
2.1 lbs 2.5 lbs
(1.0 kg) (1.2 kg)
CAUTION
35,000 gal 40,000 gal
(132,000 L) (151,000 L)
14.8 lbs 16.9 lbs
(6.7 kg) (7.6 kg)
11.8 lbs 13.5 lbs
(5.4 kg) (6.1 kg)
8.9 lbs 10.1 lbs
(4.0 kg) (4.6 kg)
5.9 lbs 6.7 lbs
(2.7 kg) (3.1 kg)
3.0 lbs 3.4 lbs
(1.3 kg) (1.5 kg)
Page 13
45,000 gal
(170,000 L)
19.0 lbs
(8.6 kg)
15.2 lbs
(6.9 kg)
11.4 lbs
(5.2 kg)
7.6 lbs
(3.4 kg)
3.8 lbs
(1.7 kg)