Replacing The Fuses; Cleaning The Clean Water Filter - Truvox International ORBIS BATTERY SCRUBBER Manual Del Usuario

6.4 Changing the brushes or pad drivers
• Lift the machine up slightly at the front.
• Press the brush rotation button (C) to enable the
rotation of the brush, then press lever (4) and release it;
the brush becomes disconnected.
•  T o replace the brush or pads refer to point 2.5 Fitting
brushes or pads.

6.5 Replacing the fuses

WARNING - Replace the blown fuse with one with the
same amperage.
• Unscrew the two bolts (1 in Fig. 17) that fasten the
charger cover (2 in Fig. 17) and remove it.
•  U nscrew the two bolts (3 in Fig. 17) of the printed circuit
board cover (4 in Fig. 17) and remove it.
•  R eplace fuse (5 in Fig. 17) Green 30A
•  P ut the printed circuit board cover (4 in Fig. 17) and the
charger cover (2 in Fig. 17) into place in reverse order.

6.6 Cleaning the clean water filter

• Clean the clean water filter weekly.
• Ensure that the water regulation tap is fully closed.
Fig. 16
Fig. 17
Fig. 18
• Unscrew the transparent filter cover (1 in Fig.18) and
remove the filter (2 in Fig. 18).
• Clean the filter (2 in Fig. 18) in running water. If it is
blocked, replace it.
• Replace all the components in reverse order.
7. After sales service
Truvox machines are high quality machines that have
been tested for safety by authorised technicians. It is
always apparent that after longer working periods,
electrical and mechanical components will show signs of
wear and tear or ageing. To maintain operational safety
and reliability the following service interval has been
defined: Every year or after 250 hours. Under extreme or
specialised conditions and/or insufficient maintenance,
shorter maintenance intervals are necessary. Use only
original Truvox spare parts. Use of other spare parts will
invalidate all warranty and liability claims. Should you
require after sales service please contact the supplier
from whom you purchased the machine, who will arrange
service. Repairs and servicing of Truvox products should
only be performed by trained staff. Improper repairs can
cause considerable danger to the user.
8. Guarantee
Your product is guaranteed for one year from the date of
original purchase, or hire purchase, against defects in
materials or workmanship during manufacture. Within the
guarantee period we undertake at our discretion, to repair
or replace free of charge to the purchaser, any part found
to be defective, subject to the following conditions:
C
ONDITIONS
1. Claims made under the terms of the guarantee must
be supported by the original invoice/bill of sale issued
at the time of sale, or the machine Serial No.
2. For claims under this guarantee contact the supplier
from whom you purchased the product who will
arrange the appropriate action. Do not initially return
the product as this could result in transit damage.
3. Neither Truvox nor its distributor shall be liable for any
incidental or consequential loss.
4. This guarantee is governed by the laws of England.
5. This guarantee does not cover any of the following:
•
Periodic maintenance, and repair or replacement
of parts due to normal wear and tear.
•
Damage caused by accident, misuse or neglect,
or the fitting of other than genuine Truvox parts.
•
Defects in other than genuine Truvox parts, or
repairs, modifications or adjustments performed
by other than a Truvox service engineer or
authorised service agent.
•
Costs and risks of transport relating directly or
indirectly to the guarantee of this product.
•
Consumable items such as, brushes, drive discs,
filters and vacuum skirts.
• This guarantee does not affect your statutory rights, or
your rights against the supplier arising from their sales or
purchase contract. Truvox International Limited policy is
one of continual product development and we reserve
the right to alter specifications without prior notice.
9