AquaPRO 63043 Manual Del Propietário página 11

3. Wrap thread tape on the threads of the venturi tube threads (#11) and nozzle threads (#01). Use the 5/8 inch socket to
thread the nozzle (#01) in the ejector, thread the venturi tube (#11) in the ejector.
4. Assembly the tank with pump together. Align a bolt (L), a flat washer (K), tank hole, pump foot hole, spring washer (M),
and another flat washer. Use the nut (N) to secure the bolt. Repeat this on the other side of the pump.
5. Remove the air stem cover from the back of the tank (B).
11