Troubleshooting, Recycling; Introduction; Problems, Causes, Solutions; Disposal And Recycling - Fimar FI32 Manual De Uso

Introduction

In the event of breakdown or malfunctioning, turn off the wall fuse and contact your Dealer's service centre.
Avoid dismantling internal machine parts.
The manufacturer is not liable for any machine tampering!

Problems, causes, solutions

Problem
The machine does not
start

Disposal and recycling

The markings illustrated here (barred garbage bin), on the utensil data plate, indicates that at the end of its
working life, the utensil must be disposed of and recycled according to European Directive. The Directive
provides for the separate collection of electric and electronic equipment by a collection system called RAEE.
Upon purchasing a new utensil, the user must not dispose of the utensil as urban waste but must return it, in
a one-to-one exchange, to the dealer or distributor. The dealer may dispose of the utensil following the
procedures set by the RAEE collection system. In the event the user disposes of the utensil without
purchasing a new one, in Italy contact the manufacturer who will provide suitable information on machine
disposal at the collection centre closest to the user. Users who do not reside in Italy must contact the Ministry
of the Environment in their countries who will provide information necessary for correct disposal. Failure to
observe the disposal procedure may cause harmful effects on the environment and people. Therefore, total
or partial illicit utensil disposal by users is punishable by local authorities.
Translation of the original instructions
TROUBLE SHOOTING,
Cause
Main switch off
No voltage on the power supply
Safety fuse burnt out
13
RECYCLING
Solution
Turn on main switch to "I"
Contact your dealer's service centre
Contact your dealer's service centre
4