Twin-Star International 26TF8299 Manual De Instrucciones página 9

12. Lift insert carefully into the back of the unit and
center in the insert opening. Do not drag insert
across hearth/base as it may scratch the unit.
Connect the Insert Support Bar (P) to the inside left
and right panels, using the bolt (AA) and washer
(BB) through pre-drilled holes.
MOVE YOUR COMPLETED UNIT ONLY SHORT
DISTANCES. MOVE COMPLETED UNIT WITH
GREAT CARE. IT TAKES TWO PEOPLE TO
MOVE COMPLETED UNIT INTO ITS FINAL
POSITION.
Hardware Used
Bolt
AA
BB
Washer
13. We have included two Tipping Restraints for this
unit. You must install this hardware to prevent
accidents or injuries. When properly installed,
this restraint can provide protection against
unexpected tipping of the Unit due to small
tremors, bumps or climbing. We strongly
recommend mounting this hardware to a wall
stud and your Unit.
Warning: You must install the Tipping Restraint
Hardware to help prevent accidents or damage
to the unit.
Hardware Used
Tipping Restraint
II
Hardware
Fig. 12
Completed
x 2
Unit
x 2
Fig. 13
x 2
8
Fireplace Insert
P
AA
BB
Install
Insert
From
Back
Electric
Wall Stud
Cabinet
Wall
II