Product Specifications; Installation And Lubrication - ACDelco ANS603 Manual De Instrucciones

Heavy Duty
Model Number
Abrasive Disc Size
Free Speed
Air Consumption
Overall Length
Air Inlet
Air Pressure
Air Hose
Net Weight
Heavy Duty
Model Number
ANS603
1. Make sure the size of air supply lines conforms to tool's maximum operating
pressure at tool inlet.
2. Dry the drain from valves at low points of piping, air filter and compressor tank
daily.
3. Make sure to only connect an air line made of components as shown in the
following diagram.
4. Before daily use, add a few drops of air tool oil in air inlet.
5. Make sure the connector couplings and hose have sufficient air flow capacity.
6. Help prevent connector coupling blockage by lubricating daily.
7. Make sure the compressed air is clean and dry.
1English1

PRODUCT SPECIFICATIONS

Sound Pressure
Level (L
A)
P
81 dB(A)

INSTALLATION AND LUBRICATION

English
ANS603
6" (150 mm)
10,000 RPM (/min)
2.38 CFM (67.4 l/min)
5-1/8" (130 mm)
1/4"
90 PSI (6.2 Bar)
3/8" (10 mm)
2.20 lbs (1.0 kg)
Noise Level
Sound Power
Level (L
93 dB(A)
-7
Vibration
Level
A)
W
2.7 m/sec
2