Descargar Imprimir esta página

Lunux Lichtband IL2 PLUS Instrucciones De Montaje página 56

Publicidad

EN
ENGLISH
Technical data.
Dimensions (L x W x H):
Weight:
Materials:
IP protection class (lamp):
Lighting technology
Lamp luminous fl ux:
In combination with corresponding
electronic ballast
56
Residual luminous fl ux:
Colour temperature:
Optics:
Temperature rating:
System power:
*Notes on installation
Caution!
4200 mm / 3000 mm / 1200 mm / 600 mm x 90 mm x 83 mm
415 g 1 LED module
8NF 192 969-XXX
515 g 1 EVG
8NF 192 968-XXX
Non-equipped support rail 4,200 mm 9.1 kg, Completely equipped support rail 4200 mm 15.4 kg
Support rail AL, PP, steel, PA, CU
IP 20;
IP40 with 196322-XXX
4700 lm, 4000 lm, 3300 lm
80 % a er 60,000 operating hours
optional 3000 K or 4000 K or 5000 lm or 6500 K
Optics integrated in plastic covering pane
4700 lm -25 °C to +45 °C
4000 lm -25 °C to +50 °C
3300 lm -25 °C to +55 °C
max. 350W (7 x 50W)
*All data refer to the connection and operation of a single lamp.
When installing and using more than one lamp, the applicable legal requirements for a
proper electrical installation must be observed.
Caution! Work may only be performed on the light in a de-energized state when active
equipment is used at the 1 - 10 V interface!
D
IP 54 /
with 196322-XXX and 206336-XXX
N optic: narrow beam pattern
W optic: wide beam pattern
D optic: double asymmetrical beam pattern
xN optic: very narrow beam

Publicidad

loading