Ryobi C123D Manual Del Operador página 5

 Charger will periodically wake from Energy Save mode to
ensure the battery pack remains in a fully charged state.
 To remove the battery pack from the charger, depress
the latches on the sides of the battery pack and separate
battery from charger.
CHARGING A HOT BATTERY PACK
When using a tool continuously, the battery pack may
become hot. The charger may be placed directly onto a hot
battery pack, but charging will not begin until the battery
temperature cools to within acceptable temperature range.
LED FUNCTIONS
See Figure 2, page 7.
MODE BATTERY PACK
Without
Power
battery pack
Hot battery pack
Testing
Cold battery pack
Deeply discharged
Defective
Defective
• If defective, try to repeat the conditions a second time by removing and reinstalling the battery pack. If the LED status repeats a
second time, try charging a different battery.
• If a different battery charges normally, dispose of the defective pack (see battery pack operator's manual).
• If a different battery also indicates "Defective," the charger may be defective.
Charging
Charging
Charged
Battery full
Energy
Battery full /
Save Mode Energy Save mode
NOTE: MAINTENANCE INFORMATION BEGINS ON PAGE 6 AFTER FRENCH AND SPANISH
LANGUAGE SECTIONS. ILLUSTRATIONS START ON PAGE 7.
OPERATION
RED
LED
On
Flashing
Fading
On
Off
Off
This product has a Three-year Limited Warranty.
For Warranty details go to www.ryobitools.com
When the charger is placed onto a hot battery pack, the
red LED will begin flashing and the green LED will be off.
When the battery pack cools the charger will automatically
begin charging.
CHARGING A COLD BATTERY PACK
The charger may be placed directly onto a cold battery pack,
but charging will not begin until the battery temperature
warms to within acceptable temperature range. When the
charger is placed onto a cold battery pack, the red LED will
begin flashing and the green LED will be off. When the battery
pack warms, the charger will automatically begin charging.
GREEN
LED
Off Ready to charge battery pack.
When battery pack reaches cooled temperature, charger
begins charge mode.
When battery pack reaches warmed temperature, char-
Off
ger begins charge mode.
Charger conditions battery until normal voltage is
reached, then begins charge mode.
Off Battery pack or charger is defective.
Battery is being charged.
Flashing
Charging is complete; charger is in maintenance mode.
On
Battery pack is fully charged and charger is in Energy Save
mode.
Fading
5 − English
ACTION