Before First Use - Hamilton Beach Professional K58 Manual De Instrucciones

How to Use the
Kettle
1. Plug into outlet. The base will chime and display the current
kettle temperature; the current time will flash 0:00; the start time
will show 19:99; the keep warm time will show 0; and the default
temperature setting "100°C Black Tea/Herbal Tea/Boil" will show.
2. Set time by pressing (HOUR) button, then press
button until the current time is displayed.
Boiling Water
Press the (ON/OFF/Standby) button and the light ring will
show red to indicate heating. The base will show the current
temperature of the water. As the water is heated, the segments
on the thermometer icon will display at the preset temperature
intervals. Once the Kettle has finished and the water is boiling, the
base will double-chime three times.
Changing Preset Temperatures
Press the (PRESET TEMP) button to scroll down the
thermometer icon until the desired preset temperature is
highlighted. If the water temperature in the Kettle is above the
preset temperature, the base will double-chime three times and
shut off automatically. Be sure that the preset temperature is
higher than the water temperature in the Kettle.
BEFORE FIRST USE: Flip open lid and fill Kettle with water to the MAX fill line
on the Water Level Window. Press
Kettle ON. The Kettle will bring the water to a boil, then shut off automatically.
Discard water and repeat 2–3 times, rinsing out the kettle each time. The Kettle
is now ready for use.
Setting a Keep Warm Time
Press the
cycle ends. To set the desired Keep Warm time, press the
(KEEP WARM) button until the desired Keep Warm time is
(MINUTE)
displayed. Once the preset temperature has been reached, the
base will double-chime three times and start the Keep Warm
countdown timer counting down in 1-minute increments. When
the timer is finished counting down, the base will double-chime
three times and turn off automatically.
NOTE: The maximum keep warm time is 60minutes.
Programming a Start Time
Make sure that the current time is set correctly on the base. Press
and hold the
will flash. Press the
the desired time. After 3 seconds the Start Time clock will stop
flashing to confirm setting is complete. Press the
button again to activate the Start Time function. A red light will
illuminate around the the
Start Time setting.
NOTE: 100°C Black Tea/Herbal Tea/Boil is not available for the
Start Time setting.
(ON/OFF/Standby) button to turn the
(KEEP WARM) button anytime before the heating
(PROGRAM) button for 2 seconds and "start time"
(HOUR) and (MINUTE) buttons to set
(PROGRAM) button to confirm the
(PROGRAM)
5