Technical Data; Safety Devices - Blanco BC GF 3500 Manual De Uso

Main Parts
A)Cooking plate: produced in a variety of shapes
to meet the different requirements.
B)Control panel: controls the appliance's operating
functions.
C)Drip tray: collects the cooking residues.
See tables and "Connection chart" at the back of
the manual.
Although the appliance is complete with all
safety devices, during installation and connec-
tion additional devices must be added if nec-
essary to comply
requirements.
The illustration shows the position of the devices.
IT IT
A)Safety thermostat with automatic reset: cuts
off the mains electricity supply in case of plate
GB GB overheating.
Important
DE DE
Tripping of the thermostat with automatic
reset is indicated by an "ALL" alarm on the
FR FR
circuit board display.
B) Heat sensor: a heat sensor which cuts off oper-
ES
ES
ation of the front of the plate if components over-
heat. Once the cause of the problem has stopped
and the plate temperature has decreased, oper-
ation is automatically restored.
Note: The central and rear zones of the plate can still be
used normally.
Important
There are no indicator devices to signal
that the heat sensor has been tripped.
English

TECHNICAL DATA

SAFETY DEVICES

with the relevant
C
C) Heat sensor: a heat sensor installed on the con-
trolling circuit board which cuts off the mains
power supply if the board overheats. Once the
legal cause of the problem has stopped and the tem-
perature has decreased, operation is automati-
cally restored.
Important
There are no indicator devices to signal
that the heat sensor has been tripped.
- 4 -
A
B