Technical Data - Beper BT.150Y Manual De Instrucciones

EN
Hot dog maker Use instructions
ONLY be added when the cooking process has completed and the foods have been removed from the appliance.
- Plug the appliance into the mains power and set the toasting level using the dial (E).
IMPORTANT:
Set the toast setting dial to a lower level for dry or thinner types of bread.
- Lower the on lever (D) until it is locked in place.
Note: if the appliance is not connected to the mains power, then the lever will not lock in place.
- Wait a few minutes and after the bread has been automatically ejected from the grill (A) check the cooking and
if the foods are not done to taste, then select a higher toasting level and/or repeat the cooking process.
- Press the button (F) to interrupt the toasting stage at any time.
IMPORTANT:
The hot dog grill (A) is very hot. To remove it without the risk of burning, always use the special tongs (G) pro-
vided or an oven mitt. After several cooking, it is recommended to let product cool down for at least a minute
before a new cycle.
CLEANING
IMPORTANT:
Before cleaning, unplug the appliance from the power mains and wait for all hot parts to cool.
Keep the appliance clean and tidy, as this will guarantee optimum toasting and a longer lifetime for the appliance.
- The grill must only be cleaned with a non-abrasive and slightly damp cloth with a little mild detergent (never use
solvents that could damage the metal).
- Any food residues that fall into the crumb tray (H) need to be removed at every use; take out the tray and wipe
clean with a damp cloth, then dry thoroughly and refit it.
- Clean the exterior of the appliance with a damp cloth and then dry. Do not use abrasive detergents as they can
ruin the surfaces.
- Put away the appliance, winding the power cord around the special cord winder

TECHNICAL DATA

Power 750W
Power supply 220-240V ~ 50/60Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
9