Cleaning And Care; Technical Data - Beper 90.494Y Manual De Instrucciones

Crepes maker Use instructions
Remove the crepe from the cooking plate with the spatula. If the crepe is too cooked, set the tem-
perature selector before making crepes.
When cooking is complete, turn off the appliance with the switch on/off. Disconnect from the socket.
Leave the appliance cool down, and clean before storing.

CLEANING AND CARE

Always clean the appliance after use. Make sure the unit is disconnected from the socket. Wait until
the unit is completely cool down.
Clean the cooking plate with a wet cloth. If food residue on the cooking plate, use this method: put
some oil on it. Leave it for about 5 minutes, and remove with a wet soft, and wipe carefully. Wipe the
appliance before storing it.
HOW TO KEEP IT LONGER
Unroll the cord under the unit base, and stand the appliance on its base. Do not put objects on the
appliance.

TECHNICAL DATA

Power 900W
Power supply 220-240V ~ 50/60Hz
For any improvement reasons, Beper reserves the right to modify or improve the product
without any notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE),
requires that old household electrical appliances must not be disposed of in the normal
unsorted municipal waste stream. Old appliances must be collected separately in order to
optimize the recovery and recycling of the materials they contain, and reduce the impact on
human health and the environment. The crossed out "wheeled bin" symbol on the product
reminds you of your obligation, that when you dispose of the appliance, it must be separa-
tely collected.
10