Velleman MML16MC Manual Del Usuario página 5

1. On the remote, press PROG.
Wait until EDIT PAGE? appears on the display.
2. Press ENTER.
3. Press  to select the page you want to program (A to Z).
4. Press ENTER.
I_EFF appears.
5. Press  to set an effect.
6. Press  to go to the next setting.
STAY appears.
7. Press  to set seconds.
8. Press  to go to the next setting.
SPEED appears.
9. Press  to set speed.
10. Press  to go to the next setting.
MODE appears.
11. Press  to set mode (normal or blink).
12. Press  to go to the next setting.
O_EFF appears.
13. Press  to set the effect.
14. Press ENTER.
Page A Content appears.
15. Type the message. You can use various colors and font sizes (see above).
16. Press ENTER.
The programmed page appears.
7.4 Schedule display
You can schedule one or more programmed pages to appear at a give date.
You can define up to 5 schedules.
To do so, you need to define

A start date

An end date

The page or pages to display
To program a schedule:
1. On the remote, press PROG.
2. Press  until EDIT SCHEDULE? appears.
3. Press ENTER.
4. Press  to select the schedule you want to program (1 to 5).
5. Press ENTER.
6. Use  or  to set the start year.
7. Press  to go to the next setting (START MONTH).
8. Use  or  to set the month.
9. Press  to go to the next setting (START DAY).
10. Use  or  to set the day.
11. Repeat steps 9 and 10 for:
START HOUR
o
START MIN
o
STOP YEAR
o
STOP MONTH
o
STOP DAY
o
STOP HOUR
o
STOP MIN
o
12. When done, press ENTER.
Display Pages appears on the board.
13. Type the page or pages you want to display.
V. 02 – 02/07/2014
MML16MC
5 ©Velleman nv