Important Warnings; Maintenance And Cleaning - UFESA AE4622 Manual De Instrucciones

EN
This device can only be used with the adapter
model supplied with the device and powered with
the safety voltage indicated in the rating plate of
the device.
Plug must be removed from socket-outlet before
cleaning or
maintaining the appliance.
This device can only be used with the adapter
model supplied with the device and powered at
very safety voltage indicated on the appliance
specifications plate.
Follow the DEVICE CHARGE instructions in order
to charge
it. Follow the device BATTERY REMOVAL
instructions for removal of the batteries from the
device.

IMPORTANT WARNINGS

Prior to plugging in the product, check that your mains voltage is the same as the one indicated on the
product label.
The mains connection cable must not be tangled or wrapped around the product during use.
Do not pull on the connection cord in order to unplug it.
Do not use, connect or disconnect the device to the mains with your hands or feet wet.
Proceed according to the conservation and cleaning section of this manual for cleaning.
Unplug the product immediately from the mains in the event of any breakdown or damage and contact
an authorised Technical support service.
In order to prevent any risk of danger, do not open the device. Only qualified technical personnel from
the brand´s Official Technical support service may carry out repairs or procedures on the device.
Any incorrect use or improper handling of the product shall render the warranty null and void. Only an
authorised technical support service centre may carry out repairs on this product.
This appliance is designed exclusively for domestic use, in no case should be a commercial or industrial
use. In case of misuse or tampering with the product, it will be out of warranty.
Do not use the appliance to vacuum liquids (water, etc), sharp objects (pins, pins, nails, glass, etc),
incandescent objects (matches, cigarettes).
Never use the turbobrush to: Polish floors, suck (Liquids, wet or damp dust, hot ash, burning objects,
such as cigarettes, matches, sharp and hard items, such us: razors, pins, thumbtacks, pieces of glass,
etc), flour, cement, plaster, printer or photocopier toner, etc.
B&B TRENDS SL. disclaims all liability for damages that may occur to people, animals or objects, for
the non-observance of these warnings.
12
OPERATION INSTRUCTIONS
Assemble the unit
Note: Ensure that the handheld vacuum cleaner is not connected to the charger before assembling the
Metal tube.
1. Take out of handheld vacuum cleaner, metal tube and floor brush.
2. Insert the extended tube into the suction inlet of handheld vacuum cleaner and you will haer the
"click". When the extended tube is assembled rightly. Please make sure that the extended tube is
inserted rightly before use the upright vacuum cleaner
3. Connect the floor brush with the extended tube. Please insert the extended tube into the floor brush.
You will hear the"click"when the extended tube is assembled rightly.
4. Insert the battery pack in the battery compartment of main body. Assure that is completely fixed.
Use the upright vacuum cleaner
Note: Please take out of the charger before use the vacuum cleaner. If the vacuum cleaner is charging
or very low battery status, the vacuum cleaner will not work.
1. To use the upright vacuum cleaner, ensure that the handheld vacuum cleaner is connected with the
extended tube and floor brush rightly.
2. To switch the appliance on, press the ON/OFF button. Both the LED lights on the suction head and
the pilot lights on the main body will light on in blue (3).
3. You can choose the suction power by pressing the speed adjusting button
4. After use, switch off the appliance (1).
Battery status indicator
Note: The battery status indicator light will blink when the battery capacity is not enough.
The battery status indicator is with 4 lights to indicate the battery capacity. 4 blue lights: battery
capacity>75%; 3 blue lights: battery capacity 75%~50%; 2 blue light: battery capacity 50%-25%; 1 blue
light< 25%; 1 blue blinking light: battery capacity –empty.
Charging your vacuum cleaner
Note: The handheld vacuum cleaner will not work when it's charging with charger.
1. Place the unit or handheld vacuum cleaner near an electrical power outlet and plug in the charger.
2. Connect the charger to the charging socket. The battery status indicator lamp will dynamically shine
to indicate that the vacuum cleaner is property connected to the charger and that the unit is being
charged. When it's fully charged, all the 4 lamps will light.

MAINTENANCE AND CLEANING

Caution: The suction hole opening must be open and free of any obstructions at all times. Otherwise,
the motor will overheat and can be damaged.
Note: In order for the vacuum to work at top performance all the time, empty the dust container after
each use and clean the dust filter after 5 cleanings.
1. Switch off the appliance and let it cool before undertaking any cleaning task.
2. Clean the outside of the appliance with a damp cloth. Do no use abrasive products or solvents.
3. Do not submerge the appliance in water or any other liquid. Make sure no water enters the appliance.
4. Remove any dirt (hair and other fibers) tangled around the brush and wheels.
Empty the dust container & dust filter
1. Push down the dust release button.
2. Empty the dust container.
Clean the dust container & dust filter
1. Remove the handheld vacuum cleaner from the unit.
2. Separate the dust cup container from the main unit.
3. Rotate the dust container towards the "unlock" marking and pull down the dust container.
EN
13