The program can detect the DMX signal automatically. If the unit detects a DMX signal or slave signal, the unit will
automatically switch into DMX Mode or slave mode.
REMOTE CONTROLLED OPERATION
Fixture Cleaning
The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize light
output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or particularly dirty
surrounding can cause greater accumulation of dirt on the unit's optics.
Clean with soft cloth using normal glass cleaning fluid.
•
•
Always dry the parts carefully.
•
Clean the external optics at least every 20 days. Clean the internal optics at least every 30/60 days.
IMPORTANT NOTE: Electric products must not be put into household waste. Please bring them to a recycling
centre. Ask your local authorities or your dealer about the way to proceed.
©Copyright LOTRONIC 2016
51~57
58~63
64~69
70~75
76~82
83~88
89~94
95~100
101~150
Corresponding to gradual mode, (EE01~EE99) CH6 adjust the speed
151~200
Corresponding to pulse mode, (CC01~CC99) CH6 adjust the speed
201~250
Corresponding to jump change(FF01~FF99), CH6 adjust the speed
250~255
PARLED710
Corresponding to AU01 Mode
Corresponding to AU02 Mode
Corresponding to AU03 Mode
Corresponding to AU04 Mode
Corresponding to AU05 Mpde
Corresponding to AU06 Mode
Corresponding to AU07 Mode
Corresponding to AU08 Mode
Corresponding to Sound Mode 2
4