Ingersoll Rand QX Serie Manual De Usuario página 12

EN
2.3.4. Unit of the Torque
Indicates unit of the Torque displayed in Configuration 1.
This can be changed by entering "EDIT MODE" and updating using "UP" or "DOWN" key.
2.3.5. Torque
Torque "LOW" Display
Torque "LOW" can be modified in this mode by
entering "EDIT" mode and using "UP or "DOWN" key.
Torque "TARGET" Display.
EN-11
Torque "HIGH" Display
Torque "HIGH" can be modified in this mode by
entering "EDIT" mode and using "UP or "DOWN" key
48619852_ed2