Safety Instructions - GBC WireBind E-Karo 40Pro Manual De Instrucciones

Specifications
Mode of Operation Punching/Binding
Max Width of Paper
De-Selectable Pins
Distance between holes
Punching Capacity
Punching Capacity Covers
Punching Output
Paper Stop
Cuttings Tray
Max Diameter of Binder
Binding Output
Net Weight
Dimensions
Special notice
Thank you for choosing a GBC Binding Machine. We aim
to produce quality binding machines at an affordable
price, with many advanced features to enable you to
create excellent results every time. Before using your
machine for the first time, please take a few minutes to
read through this guide.

Safety instructions

YOUR SAFETY AS WELL AS THE SAFETY OF OTHERS
IS IMPORTANT TO ACCO BRANDS EUROPE. IN THIS
INSTRUCTION MANUAL AND ON THE PRODUCT
ARE IMPORTANT SAFETY MESSAGES. READ THESE
MESSAGES CAREFULLY.
4
GBC WireBind E-Karo 40Pro
1 Wire Binding Channel
Electric/Manual
2 De-selectable punching pins
Up to 340mm (DP Paper)
3 Punching Slot
40 Individually disengageable
4 Paper Edge Guide
8mm, 3:1 Pitch
5 Document Measuring Guide
15 Sheets (80gsm)
Max 2 Sheets (0.2mm) 6 Wire Size Selector
Approx 9000 sheets/ hour
7 Wire Size Adjuster
Adjustable, lockable
8 Clippings Drawer
360mm x 190mm x 20mm
9 Wire closing Lever
25mm
J Wire holder
200 Bindings/Hour
26.3kg
260mmx420mmx385mm
• Please read the instructions and keep them safe for
• When using the machine, always ensure the machine
• Do not touch the heating plate of this machine, as it
m
• Keep out of reach the reach of children at all times.
• Do not tamper in any way with the internal
• Do not close the lid when the machine is in use.
• Do not immerse in liquid.
1
2
3
4
5
Location of controls
General safeguards
future reference.
is on a flat and stable surface.
may be hot.
mechanisms of this machine.
Setting up
Set the machine up on a flat stable surface.
Attach the handle to the machine in a vertical
position onto the axis and secure with the knurled
screw (See fig 1).
Insert the plug into the socket and turn on the
machine by switching the mains switch (A) on the
right side to 'On' (See fig 2).
Test the punching system on scrap paper first before
punching your final document.
Protect the machine from moisture, dust and direct
exposure to sunlight and do not place it near heating
or air conditioning machines.