Application; Warning; General Safety - Max Pro MPEAC1500/24 Manual Del Usuario

An estimation of the level of exposure to vibration should also take into account the times when the tool is
switched off or when it is running but not actually doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain
the tool and the accessories, keep the hands warm, organisation of work patterns.

APPLICATION

Read this manual carefully before operating or servicing this, air compressor to familiarize yourself with
proper safety, and main tenance procedures. FAILURE TO COMPLY WITH INSTRUCTIONS IN THIS MANUAL
COULD RESULT IN PERSONAL INJURY, PROPERTY DAMAGE, AND/OR VOIDING OF YOUR WARRANTY.
Following the instructions in this manual will provide a longer and safer service life for your air compressor.
are devoted to continuously improving and perfecting the existing products. Therefore,
the technical performance and design concept of products may vary without any prior notice; our apology
for any possible incurrence of inconvenience therefrom. Read and follow the operating instructions and
safety information before using for the first time. Save this manual.

WARNING

THINGS TO DO BEFORE OPERATING
YOUR NEW COMPRESSOR FOR THE FIRST TIME
On the top front of the compressor you will find a white plastic shipping plug inserted into the Oil Filler
Hole. Remove the shipping plug and replace by pressing the red Oil Filler Plug(supplied in the parts bag)
into the Oil Filler Hole
2. Also, supplied in the parts bag you will find a black Air Breather Assembly. Screw the assembly into the
hole on the side and at the top of the Compressor Head
3. Using the Sight-Glass built into the lower front area of the Compressor (just behind the Regulator), check
the Oil Level. It should be at the halfway mark on the Sight Glass for normal operation. If it is necessary to
add oil, please use any standard air compressor oil available at Home Centers and other major retailers.
4. There are Air Outlet Fittings on the Regulator. Air flow for one fitting is operated by turning the Regulator
Handle. The other is a free flow directly from the tank. Screw either a metal cap or a quick-coupler (not
supplied) onto the free-flowing fitting before starting the Compressor. Use nylon thread-seal tape when
working with air fittings to prevent leakage

GENERAL SAFETY

DANGER- AN IMMEDIATE HAZARD THAT WILL CAUSE SERIOUS INJURY OR LOSS OF LIFE
1. TO REDUCE THE RISK OF FIRE OR EXPLOSION, NEVER SPRAY FLAMMABLE LIQUIDS IN A CONFINDED
AREA. It is normal for the motor and pressure switch to produce sparks while operating. If sparks come into
contact with vapors from gasoline or other solvents, they may ignite cause fire or explosion. Always operate
the compressor in a well-ventilated area. Do not smoke while spraying. Do not spray where sparks or flame
are present. Keep compressor as far from spray area as possible
2. The solvents Trichloroethane and Methylene Chloride can chemically react with aluminum used in paint
spray guns, paint pumps, etc, and cause an explosion. If you are using these solvents, use only stainless
steel spray equipment. This does not affect your compressor, but many affect the equipment being used
3. Never directly inbale the compressed air produced by a compressor. It is not suitable for breathing
purposes
WARNING- A POTENTIONAL HAZARD THAT COULD CAUSE SERIOUS INJURY OR LOSS OF LIFE
1. Do not weld not the air tank of this compressor. Welding on the air compressor tank strength and cause
an extremely hazardous condition. Welding on the tank in any manner will void the warranty
2. Never use an electric air compressor outdoors when it is raining or on a wet surface, as it many cause an
electrical shock.
3. This unit starts automatically. ALWAYS shut of the compressor,
Remove the plug from the outlet. And bleed all pressure from the
2 GB
system before servicing the compressor, and when the compressor is not in use.
4. Check the manufacturer's maximum pressure rating for air tools and accessories. Compressor outlet
pressure must be regulated so as to never exceed the maximum pressure rating of the tool.
5. High temperatures and moving parts are present under the shroud. To prevent burns or other injuries.
DO NOT operate with
the shroud removed. Allow the compressor parts to cool before handling or servicing.
6. Be certain to read all labels when you are sparying paints or toxic materials, and follow the safety
instructions. Use a respirator mask if there is a chance of inhaling anything you are spraying. Read all
instructions and be sure that your respirator mask will protect you.
7. Always wear safety goggles or glasses when using an air Compressor. Never point any nozzle or sprayer
toward a person or any part of the body.
8. Do not adjust the pressure switch or relief valve for any reason. Doing so voids all warranties. They have
been pre-set at the factory for the maximum pressure of this unit.
SAFETY INSTRUCTION FOR AIR COMPRESSOR
MODERATE INJURY OR DAMAGE TO EQUIPMENT.
1. Drain the moisture from the tank on a daily basis. A clean, dry tank will help prevent corrosion.
2. Pull the pressure relief valve ring daily to ensure that the valve Is functioning properly, and to clear the
valve of any possible Obstructions.
3. To provide proper ventilation for cooling, the compressor must be kept a miniumum of 31cm(12 inches)
from the nearest wall, in a well-ventilated area.
4. Fasten the compressor down securely if transporting is necessary. Pressure must be released from the
tank before transporting.
5. Protect the air hose and electric cord from damage and puncture. Inspect them weekly for weak or worn
spots, and replace if necessary.
WARNING!
DISCONNECT POWER AND RELE ASE ALL PRESSURE FROM THE SYSTEM BEFORE ATTEMPTING TO
INSTALL,SERVICE, RELOCATE OR PERFORM ANY MAINANCE.
1. Follow all local eletrical and safety codes as well as National Eletrical Codes(NEC) and Occupational Safety
and Health Act(OSHA).
2. Electria motors and starters must be securety and adequately grounded using a three-pronged Outlet.
CAUTION!
Never use an extension cord with this product. Use additional air hose instead of an extension cord to avoid
power loss and permanent motor damage. Use of and extension cord voids the warranty.
Record the Model No.,Serial No. and Date of Purchase in the sapce below.
Model No.
Serial No.
Date of Purchase
Retain these numbers for future reference
3. BRIEF DESCRIPTION
This micro air compressor is of novel design excellent workmanship. Having the
construction, fine appearance, light weight, easy operation, high sa
in machinery, chemical industry, spray and dec
compressed air is required.
Advantages of compact
fety and low noise, it can be widely used
oration, automatic control system and other fields where
GB 3