Bell EZFit Manual De Instrucciones página 11

WhEEl SIzE INPUT
After installing the battery, a default wheel factor will appear with the last digit scrolling.
Use the Wheel Diameter Size Chart on the next page to find the correct wheel factor (c).
In the event your tire size is not included in this chart, multiply your wheel diameter (d) in
millimeters by 3.1416 to determine the correct wheel factor (c).
To enter the correct wheel factor into the computer, each digit will need to be set
individually. Press the button when the correct digit for your wheel factor appears. This
will lock in the correct digit and the next digit to the left will begin to scroll. Repeat until
all four correct digits are entered.
To return to the Wheel Size Input screen, remove the
battery or push and hold the button for two seconds
d
when in Odometer (ODO) mode.
Note: All functions will be reset at that time.
d is the diameter
of wheel
in millimeters
11