First Startup - Spirotech SPIROVENT SUPERIOR S600 Manual Del Usuario

3. Open the deaeration valve (A) to deaerate the
pump.
A
4. For units of -R and -B versions: Open the shutoff
valve (A) in the refill line.
5. For units of -B versions: Make sure that there is
water in the break tank.
5.4.2

First startup

1. Connect the unit to the mains power.
NOTE
The display of the touchscreen starts and
will guide you through the startup
procedure (Automatic Commissioning
Procedure) and all the basic necessary
settings.
For information on the content of the HMI
(user interface), refer to § 6.1.
Automatic Commissioning Procedure
The Automatic Commissioning Procedure will guide you
through the startup via several screens.
The Automatic Commissioning consists of several steps:
User manual - 3.0
1.
2.
3.
4.
5.
6.
7.
A
Select the preferred language
1.
2.
Set the actual time and date
1.
2.
3.
4.
5.
Select the correct system fluid
1.
2.
Fill up the unit with system fluid
1.
2.
3.
4.
Set the pressure levels
English
Push the start button to start the commissioning
procedure.
Select the preferred language, refer to Select the
preferred language.
Set the actual time and date, refer to Set the actual
time and date.
Select the correct system fluid, refer to Select the
correct system fluid.
Set the pressure levels, refer to Set the pressure
levels.
Fill up the unit with system fluid, refer to Fill up the
unit with system fluid.
Execute the functional test, refer to Execute the
functional test.
Select your preferred language. The indicator shows
the selected language.
Select the next page button ( > ).
Set the actual time. Move the wheels of the time
indicator (HH:MM:SS) to the correct time in hours
(HH), minutes (MM), and seconds (SS).
Set the correct time zone (UTC). Move the wheel to
the correct time zone.
Select the next page button ( > ).
Set the actual date. Move the wheels of the date
indicator (DD:MM:YY) to the correct date in day
(DD), month (MM), and year (YY).
Select the next page button ( > ).
Select the type of fluid in the system. The indicator
shows the selected type.
Select the next page button ( > ).
Open the valves. Refer to § 5.4.1.
Select the next page button ( > ).
Deaerate the pump. Refer to § 5.4.1.
Select the next page button ( > ).
A
C
B
D
13