Stiga VE32 Instrucciones De Uso página 33

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 49
6 MAINTENANCE
The machine must always be disconnect-
ed from power when carrying out mainte-
nance or repairs. Risk of crushing injuries
and fatal electric shocks.
6.1 Regular maintenance
The machine requires no regular maintenance oth-
er than cleaning, as described above.
6.2 Adjusting drive belt
1. Remove the belt cover and the motor casing by
unscrewing the 5 screws in fig. 7.
2. Remove the inner motor casing.
3. Undo the motor's adjustment screws. See fig. 8.
4. Push the motor forwards until the belt is cor-
rectly tensioned. Check that the engine is ten-
sioned equally on both sides.
5. Tighten the motor's adjustment screws.
6. Reassemble the casings and covers. See fig. 7.
SERVICE
Authorised service stations carry out repairs and
servicing. They use genuine spare parts.
Under no circumstances may parts
other than genuine spare parts be used.
This is a requirement stipulated by the
Testing Authority. The machine is
approved and tested with these parts.
If the machine requires servicing,
repairs or maintenance which entail
dismantling of the cover, this must be
performed by an authorised service
station.
The manufacturer reserves the right to make
alterations to the product without prior
notification.
ENGLISH
PURCHASE TERMS
A full warranty is issued against manufacturing
and material defects. The user must carefully
follow the instructions given in the enclosed
documentation.
Warranty period
According to relevant laws.
Exceptions
The guarantee does not cover damage due to:
- Neglect by the user to acquaint themselves with
accompanying documentation
- Carelessness
- Incorrect and non-permitted use or assembly
- The use of non-genuine spare parts
- The use of accessories not supplied or approved
by the manufacturer
Neither does the guarantee cover:
- wearing components such as blades, belts,
wheels and cables
- Normal wear
- Motors. These are covered by the motor
manufacturer's warranties, with separate terms
and conditions.
The purchaser is covered the national laws of each
country. The rights to which the purchaser is
entitled with the support of these laws are not
restricted by this warranty.
7 RECYCLING
Waste management in accordance with
the WEEE Directive (2002/96/EC)
Take care of the environment!
Do not discard with household
waste!
This product contains electrical
and electronic components that
must be recycled.
Hand the product in for recycling
at the indicated location, e.g. the
municipal recycling station.
EN
33

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Se32Xse32

Tabla de contenido