Brewing Coffee Now; Brewing Coffee Later (Delay Brew) - Mr Coffee KNX Serie Manual Del Usuario

This is due to the minimum absorption of water by the
coffee grounds.
7. Lift the brew basket lid and pour the water into the
water reservoir. Close the lid and place the empty
decanter onto the warmer plate.
CAUTION: Make sure the decanter is fully placed on the
warming plate or the water and the grounds will overflow
from the filter basket. An overflow may cause personal
injury or damage to property.
CAUTION! To reduce the risk of damaging the
decanter and/or the risk of personal injury, do not
add cold water to the decanter if the decanter is
already hot. Allow the decanter to cool before using.

BREWING COFFEE NOW

1. After completing the steps
in the "Adding Water and
Ground Coffee" section and
with the decanter and the
filter basket securely in place,
turn the coffeemaker on by
pressing the SELECT button
once. The Brew Now green light will turn
on and pulse to signal that the coffeemaker is on and
brewing (Figure 5).
2. To enjoy a more full flavored
cup of coffee, press the
STRONG BREW button once.
The STRONG amber light will
turn on (Figure 6).
3. The coffeemaker will beep
3 times when brewing is
complete. The green Brew
Now Indicator will stay on for 2 hrs to
show that the warming plate is on. After 2 hrs it will
automatically shut off and the coffeemaker will beep 3
BVMC-KNX_16ESM1.indd 15-16
Figure 5
Figure 6
14
times. Note: Warming plate will be hot for those 2 hrs.
Tip: To turn off the beep function, press and hold Set
Delay button for 5 seconds. It will beep to indicate the
function is turned off. To activate the beep function,
press the Set Delay button and hold for 5 seconds. It
will beep twice to indicate that the beep function is
activated again.
4. After the used coffee grounds have cooled, carefully
remove the filter basket and discard them.
CAUTION: The shower head cover is hot after brewing.
Always allow the coffeemaker to cool down before cleaning.
5. Make sure the decanter is empty before starting to
brew coffee.
6. Be sure to turn your coffeemaker off when no longer using it.
BREWING COFFEE LATER
1. You must first set the time when you would like the
coffeemaker to begin brewing your coffee as described
in "Setting the Clock and the Delay Brew Timer" section.
2. Prepare your coffeemaker as described in "Adding Water
and Ground Coffee" section.
3. To activate DELAY BREW and program your coffeemaker to
brew coffee at a later time, press the Select / Off button
twice (Figure 7). The amber Set Delay light will turn on.
The coffeemaker is now set to automatically brew coffee
at the pre-set later time. At this time, if you would like a
strong brew, you can press the STRONG Brew button to
activate. Note: The coffeemaker will remain in strong brew
until you change it back to regular strength by pressing
the Strong Brew button or until you unplug the machine.
4. At the pre-set time, the green BREW NOW light will
turn on and the DELAY BREW amber light will turn off,
indicating the brewing has started in the selected brew
strength.
5. The coffeemaker warmer plate will keep your coffee hot
for 2 hours and then automatically turn off.
15
4/1/16 9:42 AM