Medisana FRM Instrucciones De Manejo página 16

GB
3 Operating
3.3
Temperature cycle
treatment
12
• The control buttons are operated in the same way as with a foot massage.
• Sit down in the chair, resting your back against the unit for treating
tense ness and hardened muscles in the lower back region.
• Make sure all functions are switched off before unplugging the unit from the
mains.
• Place the massager on the floor in front of a comfortable chair and plug it
into the mains outlet.
• Before switching on the heated surface, use the hot/cold switch
required temperature range. Pushing the hot/cold switch
heat treat ment, while pushing the switch
• The raised heat treatment surface will start to heat up or cool down once you
press button on the unit. A further press of the button
temperature range to level 2. At the same time, the LED indicator changes
from "LO" to "HI". Press the button
heat treatment. The LED next to the button
• Alternating hot and cold treatment for three to five cycles stimulates the soles
of the feet and promotes better circulation. If you wish, the treatment my be
combined with the massage function.
• You should not carry out more thao five heat cycle sessions on any one day.
to select the
to the right selects
to the left selects cold.
increases the
one more time to switch off the
will go out.