Technical Data; Noise Emission Specifications; Vibration Specifications; Scope Of Supply - Mafell LO65 Ec Manual De Servicio

2.3 Technical data

Universal motor, radio and TV interference
suppressed
Input power continuous operation
Milling depth adjustment with fine adjustment
Revolving depth control turret
Tool fastening:
with collets
or with adapter for router bit
Idling speed
Connection diameter at extraction hood
Weight without mains cable

2.4 Noise emission specifications

Noise emission values determined according to EN 60745-1 and EN 60745-2-17:
Sound power level
Idling 99 dB (A)
Machining 106 dB (A)
The noise measurement was recorded using the saw blade included in the standard equipment.
The values stated do not take into consideration any possible series variances and are not suitable for
determining the rating levels, as these fluctuate in dependence on the time in service, the respective type of
machining and the environmental influences. The noise rating level can therefore only be determined on an
individual basis at the machine user's position.

2.5 Vibration specifications

The typical hand-arm vibration is 3.3 m/s

2.6 Scope of supply

Router LO 65 Ec MaxiMax
Item No. 916901, 916920, 916921, 916922
1 parallel guide fence
1 template guide Ø 30 mm
1 collet Ø 8 mm (Ø 1/2" - GB)
1 adapter for router bit M 12 x 1
1 extraction hood
1 connecting cable
1 operating tool
1 operating manual
1 folder "Safety Instructions"
230 V~, 50 Hz
2600 W
0 - 65 mm (0- 17/16 in.)
3-stage
Ø 6 – 12 mm and Ø 1/2"
M 12 x 1 (M 10)
10000 - 22000 rpm
35 mm (1 3/8 in.)
5.5 kg (6.2 lbs)
Workplace-related emission value
88 dB (A)
95 dB (A)
2 .
LO 65 Ec MidiMAX
(specially suited for template milling)
Item-No. 916950, 916951
1 template guide Ø 30 mm
1 adapter for router bit M 12 x 1
1 extraction hood
1 connecting cable
1 operating tool
1 operating manual
1 folder "Safety Instructions"
-16-