Turning On The Power - Christie LX501 Guía De Preparación

LX501/LX601i/LW401/LW551i/LWU421/LWU501i

Turning on the power

Make sure that the power cord is firmly and correctly connected to the
1.
projector and the outlet.
Make sure that the POWER indicator is
2.
lighted in steady orange. Then remove
the lens cover.
Press the STANDBY/ON button on
3.
the projector or the ON button on the
remote control.
The projection lamp will light up and the
POWER indicator will begin blinking in
green. When the power is completely on, the
indicator will stop blinking and light in steady
green.
WARNING ►A strong light is emitted when the projector's power is on. Do
not look into the lens of the projector or look inside of the projector through any
of the projector's openings.
NOTE • Please power on the projector prior to the connected devices.
• The projector has the DIRECT POWER ON function, which can make the
projector automatically turn on. For more information, please see User Manual
- Operating Guide.
Setup Guide
10
POWER indicator
ON button
STANDBY/ON button
020-000504-02 Rev. 1 (06-2012)