Christie LX501 Guía De Preparación página 9

Preparating for remote control
Please insert the batteries into the remote control before using it. If the remote
control starts to malfunction, try to replace the batteries. If you will not use the
remote control for long period, remove the batteries from the remote control and
store them in a safe place.
1. Holding the hook part of the battery cover, remove it.
Align and insert the two AA batteries
2.
(HITACHI MAXELL or HITACHI MAXELL
ENERGY, Part No.LR6 or R6P) according to
their plus and minus terminals as indicated in
the remote control.
Replace the battery cover in the direction of the arrow
3.
and snap it back into place.
WARNING ►Always handle the batteries with care and use them only as
directed. Improper use may result in battery explosion, cracking or leakage,
which could result in fire, injury and/or pollution of the surrounding environment.
• When replacing the batteries, replace both of the batteries with new batteries
of the same type. Do not use a new battery with a used battery.
• Be sure to use only the batteries specified. Do not use batteries of different
types at the same time. Do not mix a new battery with used one.
• Make sure the plus and minus terminals are correctly aligned when loading a
battery.
• Keep a battery away from children and pets.
• Do not recharge, short circuit, solder or disassemble a battery.
• Do not place a battery in a fire or water. Keep batteries in a dark, cool and dry
place.
• If you observe battery leakage, wipe out the leakage and then replace a
battery. If the leakage adheres to your body or clothes, rinse well with water
immediately.
• Obey the local laws on disposing the battery.
Setup Guide
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
5
1
2
3
020-000504-02 Rev. 1 (06-2012)