Comunello AF 550 Manual De Instrucciones página 14

4. SHEATH CONNECTION AND BRAKE RELEASE
CABLE
Insert the sheath into its housing and insert the metal cable into the lever hole.
Place the lever in its pre-established housing.
Apply the locking setscrew to the cable, lining it up to the lever and secured with an M4 allen key (Fig. 4).
Adjust the tensor on the bottom of the motor gear brake and pull the sheath taught.
Pull the lever and check that the motor gear is released by moving the shutter by hand. If necessary, use the tensor
or the stop screw so that the release and lock functions always work correctly.
5. SHUTTERS MOVEMENT
MAN PRESENT
• Switch I pressed and held: shutter close (Fig. 4)
• Switch II pressed and held: shutter open
6. GATES MOVEMENT
STEP-BY-STEP MODE
• Switch I (PP entrance): pressing once, twice or three times controls respectively the opening, stopping and
closing of the gate. (Fig.2 - Fig.6)
• Switch II (PED entrance): pressing once, twice or three times controls respectively the opening, stopping and
closing of one of the pedestrian gates.
AUTOMATIC MODE
• Switch I (PP entrance): pressing once or twice controls respectively the opening and closing of the gate.
• Switch II (PED entrance): pressing once or twice controls respectively the opening and closing of one of the
pedestrian gates. (Fig.2 - Fig.6)
3
(AUTOMATION FRAME)
(AUTOMATION GATE)