Sander Safety Warnings; Functional Description - Makita BO4553 Manual De Instrucciones

ENGLISH
(Original instructions)
1 Switch
2 Lever
3 Clamper
4 Punch plate
5 Sandpaper
6 Guide
7 Velcro sandpaper
SPECIFICATIONS
Model
Pad size
Orbits per minute (min
Dimensions (L x W x H)
Net weight
Safety class
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for the sanding of large surface of
wood, plastics and metal materials as well as painted
surfaces.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future refer-
ence.

SANDER SAFETY WARNINGS

1. Always use safety glasses or goggles. Ordinary
eye or sun glasses are NOT safety glasses.
2. Hold the tool firmly.
3. Do not leave the tool running. Operate the tool
only when hand-held.
4. This tool has not been waterproofed, so do not
use water on the workpiece surface.
5. Ventilate your work area adequately when you
perform sanding operations.
6. Some material contains chemicals which may be
toxic. Take caution to prevent dust inhalation
and skin contact. Follow material supplier safety
data.
4
Explanation of general view
8 Base
9 Dust bag
10 Hole
11 Entry port
12 Dust spout
13 Protrusion
14 Groove
BO4553
116 mm × 104 mm
–1
) 14,000
120 × 112 × 137 (mm)
1.0 kg
BO4561
112 mm × 190 mm
14,000
209 × 112 × 135 (mm)
0.92 kg
7. Use of this tool to sand some products, paints
and wood could expose user to dust containing
hazardous substances. Use appropriate respira-
tory protection.
8. Be sure that there are no cracks or breakage on
the pad before use. Cracks or breakage may
ENE052-1
cause a personal injury.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
ENF002-2
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this instruc-
tion manual may cause serious personal injury.

FUNCTIONAL DESCRIPTION

GEA010-1
CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.
Switch action (Fig. 1)
CAUTION:
• Before plugging in the tool, always check to see that
the tool is switched off.
GEB021-4
To start the tool, press the "ON (I)" side of the switch. To
stop the tool, press the "OFF (O)" side of the switch.
15 Front fixing cardboard
16 Front side of paper dust bag
17 Claws
18 Upper part
19 Notch
100 mm × 164 mm
187 × 100 × 137 (mm)
/II
BO4563
14,000
1.0 kg