DURAVIT C.1 C11060 003U 10 Instrucciones De Montaje página 6

3 X
7 Nm 3
5 ft-lbs.
> Install the sealing and mounting rings.
> Tighten the screws maximum torque
5 ft-lbs.
> The nipples must face each other.
5 X # C11060 005U 10, # C11060 006U 10
CAUTION
Cut and crush injuries
> Wear gloves during installation.
> Install the pull rod into opening on the top
of the spout.
6
MAL_57157/19.03.2
1
2
4 X
> Inspect the alignment of the handles. The
handles must be in one line and face away
from each other.
NOTICE
Likelihood of confusion
> Use handle with the red dot for hot water.
> Use handle with the blue dot for cold water.
X 6
> Assemble the O-ring over the hoses.
> Place the spout assembly into center
opening in sink.
> Install washers and securing nut onto the
spout body from underneath.