OP SPEEDY CLEAN Manual De Uso página 41

OP
S.r.l.
25131 BRESCIA - Via Serpente, 97 - Tel. 030/3580401 - Fax 030/3580838
________________________________________________________________________________________________________________
TECHNICAL DATA / DIMENSIONS
Dimensions in mm (W x D x H)
With suction line filter of 90 µ we have obtained a cleaning level
corresponding to NAS and ISO 4406 classification on a 2" hose
With suction line filter of 30 µ we have obtained a cleaning level
corresponding to NAS and ISO 4406 classification on a 1" hose
HANDLING / TRANSPORT
The following precautions should be taken, however:
• If the machine has to be moved from one place to another, hoist it using a forklift. During
handling, take care not to tilt the machine as oil could leak out or it could tip over. In
necessity case, to unscrew the support of hoses like in figure 5 position 2
• Avoid impact or sudden jerks when lifting or setting down.
• During movement from place to place take care not to damage the pneumatic parts in the
machine compartment.
• If the machine has to be shipped, make sure it is securely fastened to the means of
transportation and not subject to impact or vibration.
ILLUMINATION
The equipment is not provided with illumination and must therefore be used in a sufficiently well-
lighted environment. If perfect visibility is not possible in the work zone, the machine should
not be used.
Pneumatic supply
Air consumption in use
Outlet pressure
Tank capacity
Cleaning liquid 33lt
Weight (Kg)
Controls
1500mm long
1500mm long
Working capacity 1/4" – 2"
41
SPEEDY CLEAN
531x1037x960
6 bar max
200Nl/min
~ 60 bar
33lt
Degreasing solvent
114
Pneumatic
NAS 8
ISO 4406 16/13
NAS 7
ISO 4406 15/12
Yes
E
N
G
L
I
S
H