Fig. no.
Code no.
1
A160143
2
A160213
3
A160790
3
A160791
3
A160792
3
A160794
4
A160644
5
A160784
5
A160785
5
A160786
6
A160787
6
A160789
7
A160026
8
A161392
9
A161472
9.8 Air hood TIGERHOOD 90x110-vl and 50 x 108-vl
Fig. no.
Code no.
1a
517840
1a
518110
1b
212922
1b
212924
2
A160730
4
A160741
5
A160666
6
A160166
7
A160213
8
A161472
10. STATUTORY REQUIREMENTS AND REGULATIONS
89/686/EEC:
EN12941:1998
EN 12941/A1:2003
EN 12941/A2:2008
System approval by:
Production control according to article 11B:
Marks on the system:
11. GENERAL
Honeywell Respiratory Safety Products cannot, in general terms, accept responsibility for damage incurred by the owner, user or other
persons or third parties using the safety product, which results either directly or indirectly from incorrect use and/or maintenance of the
safety product, including use of the product for any purpose other than that for which it was supplied and/or the non-compliance or
incomplete observance of the instructions contained in this user manual and/or in connection with repairs to the safety product that have
not been carried out by us or on our behalf.
Our general Sales and Supply conditions are applicable to all transactions. Honeywell Respiratory Safety Products continually strives to
improve its products and reserves the right to change the specifications given in this manual without prior notification.
Warning: The European guideline "Personal Protection Equipment 89/686/EEC" stipulates that only inspected protective equipment
bearing the CE mark may be traded and used. Use of substitute, non-original spare parts invalidates the CE approval and also all rights
regarding guarantee, whereby the user and the person initially marketing these spare parts shall be punished by the relevant authorities
of the EEC member countries, whereby additionally the entire product will be excluded from use and withdrawn from commercial
transactions, respectively. Original spare parts can be recognized by the affixed code numbers, supplemented with the manufacturer's
mark and "CE approval", possibly supplemented with a year of applicability.
12. GUARANTEE
Honeywell Respiratory Safety will repair or, if necessary, replace this product free of charge in the event of a material or manufacturing
defect within 12 months of the purchase date, provided that the product has only been subjected to normal usage in accordance with the
user manual. The guarantee is invalidated if the type or serial number marking is modified, removed or made illegible.
Products specified in this manual are products of:
Honeywell Respiratory Safety Products, an ISO 9001 certified Manufacturer of Respiratory Protective Devices.
ZI Paris Nord II – B.P. 50288
33, rue des Vanesses
95958 Roissy CDG Cedex
France
Products specified in this manual are manufactured at:
Honeywell Safety Products Slovakia Sro,
Nitrianska cesta 503/60
95801 Partizanske
Slovak Republic
Short description
Comfa Seal® EUROMASKI
Headband-airduct assembly
UV-filter shade 1.7 (standard)
UV-filter shade 3 (optional)
UV-filter shade 5 (optional)
UV-filter clear (optional)
Visor frame
Visor filter shade 5 (optional)
Visor filter shade 8 (standard)
Visor filter shade 10 (optional)
Big visor filter shade 8 (optional)
Big visor filter shade 10 (optional)
UV-filter mounting stud
Visor mounting stud
Sweatband
Short description
Cover lens 90x110 10pcs for hood A114725
Cover lens 50 x 108 25 pcs for hood A114728
Welding lens for hood A114725
Welding lens for hood A114728
Disposable visor (Qty./pack 10)
Window. Cellulose acetate (Qty./pack 5)
Clamp for disposable visor (pair)
Joint Comfa VL
Headband-airduct assembly
Sweatband
European guideline for Personal protective equipment
Powered filtering devices incorporating helmets or hoods
Powered filtering devices incorporating helmets or hoods
Powered filtering devices incorporating helmets or hoods
Depends on the COMPACT AIR Powered Air Purifying Respirator
INSPEC, 56 Leslie Hough Way, Salford
Greater Manchester, M6 6AJ, United Kingdom,
CE 0194 (related to the COMPACT AIR Powered Air Purifying Respirator system)
EN-4