Environmental Protection; Technical Data - Oleo-Mac GS 180E Manual De Instrucciones

ENVIRONMENTAL PROTECTION

Environmental protection should be a priority
of considerable importance when using the
machine, for the benefit of both social cohesion
and the environment in which we live.
- Try not to cause any disturbance to the
surrounding area.
- Scrupulously comply with local regulations
and provisions for the disposal of oils, petrol,
batteries, filters, deteriorated parts or any
elements which have a strong impact on the
environment. This waste must not be disposed
of as normal waste, it must be separated and
taken to specified waste disposal centres
where the material will be recycled.

10. TECHNICAL DATA

Power
Voltage
Frequency
Oil tank capacity
Chain lubrification
No.of pinion teeth
Weight without bar and chain
Recommended guide bar and chain combinations
Chain pitch and gauge
Guide bar length
Type of guide bar
Type of chain
Cutting length
WARNING!!!
The risk of kickback is greater when using a combination bar/chain wrong! Use only the
combination bar/chain recommended and follow the instructions for sharpening.
Demolition and disposal
When the machine reaches the end of its
service life, do not dispose of it into the
environment; instead take it to a waste disposal
centre.
Most materials used in the manufacture of the
machine are recyclable; all metals (steel,
aluminium, brass) can be delivered to a normal
recycling station. For information contact your
local waste recycling service. Waste disposal
must be carried out with respect for the
environment, avoiding soil, air and water
pollution.
In all cases, applicable local legislation must
be complied with.
GS 180E
1800 W
350 cm
Automatic not adjustable
GS 180E
3/8" x.050" SP
14" (35 cm)
140 SDEA 041
91PJ052X
330 mm
GS 200E
2000 W
230V
50 Hz
3
(0.35 ℓ)
6
4.4 kg
GS 200E
3/8" x.050" SP
16" (41 cm)
160 SDEA 041
91PJ057X
395 mm
I
GB
F
D
E
SK
P
GR
TR
CZ
RUS
UK
PL
33