Pioneer Elite VSX-LX301 Manual De Instrucciones página 17

> Before start > Hookup
BD/DVD
1 Analog audio cable, 2 Speaker cable
> Setup > Playback
2
1
LINE
IN
ZONE2 PRE/LINE OUT
> Part Names
Multi-zone Connection
You can enjoy audio in the separate room by, for example,
playing a Blu-ray Disc player in the main room (where this
unit is located) and listening to internet radio in the
separate room (ZONE 2).
0 DSD and Dolby TrueHD audio signals are not output to
ZONE 2 when selected with the "NET" input selector.
Connections with an AV component
When outputting the audio of an external AV component
to ZONE 2, you need to connect using an analog audio
cable.
ZONE 2 PRE/LINE OUT
It is possible to play 2 ch source in a separate room while
7.1 ch source is being played in the main room. Connect
the ZONE 2 PRE/LINE OUT jacks of the unit and the
MAIN ROOM
LINE IN jacks of the pre-main amplifier or the powered
amplifier in a separate room with an analog audio cable.
ZONE SPEAKER
ZONE2
It is possible to connect speakers in a separate room and
play 2 ch sources.
0 You can play through a maximum of 5.1 channels in the
main room during ZONE 2 playback. Listening modes
such as the Dolby Atmos modes cannot be selected.
0 Note that sound is not output from Speaker B when
Zone Speaker is used.
Setup
0 Settings are required in Initial Setup, "4. Multi
Zone Setup" ( P20) to enjoy this feature.
ZONE SPEAKER
En
17