Step1: Choose Your Speaker Layout - Pioneer Elite VSX-LX301 Manual De Instrucciones

> Before start > Hookup

Step1: Choose your Speaker Layout

1 2
Front Speakers
3
Center Speaker
4 5
Surround Speakers
6
Powered Subwoofer
> Setup > Playback > Part Names
For 5.1-Channel System
This is a 5.1-channel system that is the basic surround system.
Front speakers output front stereo sound and a center speaker outputs center
sound such as dialogs and vocals. Surround speakers create back sound
field. Powered subwoofer reproduces bass sounds and creates rich sound
field. The front speakers should be positioned at ear height, while the
surround speakers should be positioned just above ear height. Center
speaker should be set up facing the listening position. Place the powered
subwoofer towards the front. Placing it between the center speaker and a front
speaker gives you a natural sound even when playing music.
0 The front speakers, center speaker, and surround speakers are counted as
5 channels, and the powered subwoofer is counted as 0.1 of a channel,
giving us the name 5.1ch system.
Go To "Hookup" ( P9)
＊1
＊ 1: 22e to 30e, ＊ 2: 120e
Speaker B System
In a 5.1-Channel System, you can
connect one more set of front
speakers to use as a Speaker B
System. In this state, the 5.1-
Channel System becomes the
Speaker A System and you can
switch the same audio to output from
A, B, or A+B. Note that sound is not
output from Speaker B when Zone
Speaker is used ( P17).
Go To "Hookup" ( P9)
＊2
3
En