Pioneer Elite VSX-LX301 Manual De Instrucciones página 7

> Before start > Hookup
1 6
( P3)
9 :
Height Speakers
Choose one of the following:
$
Dolby Enabled Speakers (Front)
$
Dolby Enabled Speakers (Surround)
$
Dolby Enabled Speakers (Surround Back)
> Setup > Playback > Part Names
For 7.1-Channel System
(with Height Speakers-C)
This is a basic 5.1-channel system that using Dolby enabled speakers, with
the addition of height speakers, either as Dolby enabled speakers (front) or
Dolby enabled speakers (surround) or Dolby enabled speakers (surround
back). Select which speakers to setup according to the environment of the
room. Dolby enabled speakers are special speakers designed to face the
ceiling so that sound is heard after bouncing off the ceiling so that sound
appears to be coming from overhead. You can select the Dolby Atmos
listening mode (5.1.2 channel playback), which realizes the most up-to-date
3D surround sound including overhead sounds, when the input format is Dolby
Atmos. With formats other than Dolby Atmos, you can still create a sound field
by outputting sound from the height speakers when you select the Dolby
Surround listening mode. Place them either above the front speakers or above
the surround speakers or surround back speakers. If they are integrated Dolby
enabled speakers, put in place of the front speakers, the surround speakers,
or the surround back speakers.
Go To "Hookup" ( P10)
＊1
＊3
＊ 1: 22e to 30e, ＊ 2: 90e to 120e, ＊ 3: 135e to 150e
＊2
7
En