Error Codes; Troubleshooting - CAPITAL SPORTS INFINITY PRO 2.0 Manual De Instrucciones

How to move
The treadmill comes with two sets of casters. Please fold the treadmill and
make sure the deck is fixed before moving it. Hold the handrails tightly, make
the machine lean backward and move it.
Note: Attempt to move or transport the treadmill without a folded and
fixed deck can result in personnel injury or machine damage.
How to transport
The treadmill comes with two sets of casters. Please fold the treadmill and
make sure the deck is fixed before moving it. Hold the handrails tightly, make
the machine lean backward and move it. The treadmill is very heavy. DO NOT
arbitrarily move it unless it's necessary.

ERROR CODES

E00
No signal in motor controller
E01 Speed signal error
E02
Motor voltage error
E03 Motor current error

TROUBLESHOOTING

Problem
The console display
overview is not ON
Current breaker activates
when the machine is
operating
E04
Motor power cord falling out
E05 Motor acceleration error
E09
Motor controller error
Possible Cause
Make sure the outlet has power, the power cord is
connected to the outlet and the treadmill is turned on.
Make sure the connect line in the display console is
correctly connected and there is no potential damage
caused by the pressure to display console during
assembly.
Connect the device only to sockets to which no other
devices are connected.
EN
89