Operation Part; Iii.1. Wire Controller Wrc08 - Olimpia splendid NEXYA S3 Manual De Usuario

III. OPERATION PART
III. 1. WIRE CONTROLLER WRC08
■ FUNCTION SUMMARIZE
The wire controller has functions as follows:
1. Set the mode through buttons.
2. LCD display.
3. Display the timer function of remain time.
■ NAME AND FUNCTION OF LCD ON THE WIRE CONTROLLER
③ Economical operation display
1 Mode display (MODE):
Press MODE button to select COOL, DRY, "HEAT", or "FANONLY" mode. (HEAT is invalid for COOL ONLY wire
controller.)
2 Fan speed display (FAN).
Press FAN SPEED to select fan speed from "AUTO", "LOW", "MED", and "HIGH".
NOTE: some air conditioners have no MED fan speed, then the MED is regarded as HIGH.
3 Economical operation display:
Press ECONOMICAL to display economical operation, if press ECONOMICAL again then the display disappears.
4 Lock display:
Press LOCK to display the icon of LOCK. Press the button again then the icon of LOCK disappears. In the mode of
LOCK, all the buttons are invalid except for LOCK button.
5 CLOCK display
Usually display the clock set currently. Press the button CLOCK for 4 seconds, the HOUR part will flash, press button
▲and ▼ to adjust HOUR. Press the button CLOCK again, the minute part flash, press button ▲ or ▼ to adjust MINUTE.
After clock set or clock operation, it must press CONFIRM to complete the set.
6. TIMER ON/OFF display:
Display ON at the state of TIMER ON adjustment or after only set the TIMER ON; Display OFF at the state of TIMER OFF
adjustment or after only set the TIMER OFF; Display ON/OFF if simultaneously set the mode of TIMERON and TIMER
OFF.
7. Temperature display area:
Usually display the set temperature. Press the buttons ▲ or ▼ to set temperature, at the mode of FAN, there is no figure
display in the area.
② FAN speed
① MODE display
⑦ Temperature display
④ LOCK display
CLOCK display
⑤
⑥ OFF/ON display
35