Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
3. Setting the ball joint for the
desired tilt angle
a. Loosen the little wheel on the ball joint
behind the holder and set the desired
vertical or horizontal position, as well as
the tilt angle. Then tighten the little wheel
again.
4. Fastening the jaws
a. To open the jaws, push the button on the left side of the
holder.
b. Insert the desired appliance and secure into place by
pushing the jaws together.
c. To release the appliance, push the button to open the
jaws.
Cleaning and care
• Do not use any cleaning agents with alcohol or other
flammable liquids/substances.
• Clean the product with a dry, lint-free cloth.
Disposal
• The packaging consists of environmentally friendly
materials that you can dispose of at local recycling points.
Dispose of the product in the residual waste at the end of
its lifespan.
Warranty
3 years warranty on this product from the date of purchase,
only applies to the first purchaser, not transferable. Please
keep the receipt as proof. The warranty only applies to ma-
terial or production faults, not for wear parts or for damage
due to incorrect use. The warranty is void in the case of
external intervention. Your legal rights remain unaffected by
7159_LB5_ES_IT_PT_GB_DE_140704.indd 16
04.07.14 14:07
Publicidad
Tabla de contenido
