Elinchrom ELB 500 TTL UNIT Manual De Funcionamiento página 15

1. Skyport Synchronisation
2. Skyport frequency channel and group number
3. Photocell status
4. Action mode
5. Eco mode
6. Battery charge status
7. Power outlet B modelling lamp status
8. Power setting of the B outlet in f-stop equivalent
9. Flash Duration value of the B outlet*
10. Increase selected outlet by 1 f-stop
11. Decrease selected outlet by 1 f-stop
12. Flash Duration value of the A outlet*
13. Power setting of the B outlet in f-stop equivalent
14. Power outlet A modelling lamp status
* The flash duration is only visible at normal x-sync shutter speeds
(1/125 or 1/250s depending on the DSLR camera.
TTL MODE
The TTL (Through the Lens Metering) mode allows you to access
fully automatic exposure setups according to your digital camera.
The TTL values are automatically saved when passing to the
manual mode.
To operate the unit in the TTL mode, please use the radio remote
Elinchrom Pro and activate the TTL function.
EN
15