Gima 27600 Manual De Uso página 6

ENGLISH
PRODUCTS
- 27600 bed with 1 articulation
- 27601 bed with 1 articulation with wheels
- 27610 bed with 3 articulation
- 27611 bed with 3 articulation with wheels
- 27605 standard bed – no castors
- 27606 standard bed – Ø 50 mm castors
- 27607 standard plus bed – no castors
- 27608 standard bed – Ø 100 mm castors
INTRODUCTION
In accord with Regulation (EU) 2017/745, this product is part of the CLASS I MEDICAL DEVICES. You
should carefully read this manual before using this medical device.
DESCRIPTION
The orthopedic bed is intended for use in hospital, community, nursing homes in order to help the
patient in small daily needs during hospitalization.
The structure is composed of a painted steel welded mesh that supports the mattress, divided into
two sections for the version with 1 crank (27600/27601) or through an automatic rack (27607/27608);
divided into three sections for the versions with 2 cranks (27610/27611). The headboard and footboard's
structures is produced in chromium-plated tubular steel with MDF panels and equipped with legs (with
or without wheels). The crank and the control lever are chromium-plated, with a plastic handle.
The standard beds (27605/27606) are simple beds with or without wheels, totally in epoxy powder-
coated steel, including headboard and footboard, with a rigid mesh mattress platform. Optional items:
Collapsible supports, Lifting pole for ill people.
COMPONENTS:
(1) Headboard (with panels or tubular steel)
(2) Footboard (with panels or tubular steel)
(3) Bed Base: Welded mesh with 1 or 2 cranks included (27600/27601/27610/27611), bed base with
adjustable backrest (27607/27608), rigid mesh mattress platform (27605/27606).
Assembly material:
- N.4 5x20 SCREWS
- N.4 M5 BOLTS
ASSEMBLY INSTRUCTIONS:
The bed is supplied partially assembled. The headboard and footboard are supplied already assembled,
complete with frame, panel or crossbars and wheels, if the model requires it. It is necessary to fix the
frame/net to the headboard and footboard.
Begin the assembly phase by setting up a stable horizontal work plan.
6