Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
FOOD CONTACT HAZARD PRECAUTIONS
3.0 STRUCTURE AND OPERATING PRINCIPLES
The appliance comprises a plastic moulded housing designed to accommodate all the moving parts.
The plastic "work" plate is fastened on top via the motor pin, which allows it to turn supported by the
roller ring.
On the front, you will see the knob for controlling the direction and speed of rotation.
On the back, you will see the ON/OFF button and the connector for plugging in the power cord with
plug.
4.0 TECHNICAL SPECIFICATIONS
ITEM
Voltage
Power
Maximum absorbed current
Electrical insulation class
Dimensions
Overall weight
Sound power level
Protection rating
Materials
Temperature range
Operating environment
Max. room temperature
Electromagnetic Compatibility Directive EMC: 2014/30/EU
Compliance
Standards applied
12
SPINNER
115-230V
/ 50-60 Hz
AC
15W
0.1A @ 115V - 0.05A @ 230V
II
27 x 26 x H 12 cm
1.6 kg
57 dB
@ 1m
MAX
IP 31
Plastic
0 - 40°C
Artisan bakery producing fine foods/cakes
40°C
Low Voltage Directive LVD: 2014/35/EU
RoHS Directive: 2011/65/EU
WEEE Directive: 2012/19/EU
EN 60335-1:2012
ENGLISH
5.0 APPLICATIONS
The appliance has been placed on the market solely for professional use, for use in bakeries
producing cakes and pastries.
6.0 DIRECTIONS FOR USE
1
Plug the power cord into the connector on the back of the device.
Plug the other end of the cable into the power socket, making sure first that the rating is
2
correct.
3
Switch on the device by setting the switch on the back of the device to (1).
Turn the knob on the front of the device to control the plate's direction and speed of
4
rotation.
7.0 TROUBLESHOOTING
FAULT
POSSIBLE CAUSE
Power cord not plugged in
The device fails to switch
A
on with the switch set to
(1)
Light on switch is lit and
central LED is unlit
The unit's central LED is
lit, but the motor fails to
The motor may be
B
start when the knob is
disconnected or broken
turned
The plate fails to move or
C
rotates only slowly when
It may be jammed
the knob is turned
7.1 SPARE PARTS
TCSILICO
240MM SILICONE DISC FOR SPINNER
240MM PLEX PLATE FOR SPINNER
REMEDY
Check that both the connector on
the back of the device and the
properly
plug in the power socket are
plugged in correctly
Contact Martellato customer
support
Contact Martellato customer
support
Check for foreign matter between
the housing and rotating plate
and, where necessary, remove it.
TCDISCO24
TCTRASCINATORE
REVOLVING SUPPORT FOR PLATE
D.188 M
ENGLISH
13
Publicidad
Tabla de contenido
