Specifications - Sherwood RD-5405 Instrucciones De Funcionamiento

RD-5405(G)100316_RD-5503(g) 2010-04-20 오후 7:57 페이지 41

Specifications

■ AMPLIFIER SECTION
• Power output, stereo mode, 6 Ω, THD 0.7%, 40 Hz~20 kHz
• Total harmonic distortion, 6 Ω, 50 W, 1 kHz
• Intermodulation distortion
60 Hz : 7 kHz= 4 : 1 SMPTE, 6 Ω, 50 W
• Input sensitivity, 47 kΩ
Line (CD, TAPE, VIDEO)
• Signal to noise ratio, IHF "A" weighted
Line (CD, TAPE, VIDEO)
• Frequency response
Line (CD, TAPE, VIDEO), 20 Hz~50 kHz
• Output level
TAPE/VIDEO 1 REC, 2.2 kΩ
• Bass/Treble control, 100 Hz/10 kHz
• Surround mode, only channel driven
Front power output, 6 Ω, 1 kHz, THD 0.7 %
Center power output, 6 Ω, 1 kHz, THD 0.7 %
Surround power output, 6 Ω, 1 kHz, THD 0.7 %
■ DIGITAL AUDIO SECTION
• Sampling frequency
• Digital input level
Coaxial, 75 Ω
Optical, 660 nm
■ FM TUNER SECTION
• Tuning frequency range
• Usable sensitivity, THD 3%, S/N 26 dB
• 46 dB quieting sensitivity, mono/stereo
• Signal to noise ratio, 65 dBf, mono/stereo
• Total harmonic distortion, 65 dBf,1 kHz, mono/stereo
• Frequency response, 30 Hz~12 kHz
• Stereo separation, 1 kHz
• Capture ratio |
• IF rejection ratio
■ AM TUNER SECTION
• Tuning frequency range
• Usable sensitivity
• Signal to noise ratio
• Selectivity | 25 dB
■ GENERAL
• Power supply |
• Power consumption
• Dimensions (W× H× D, including protruding parts)
• Weight (Net) |
Note: Design and specifications are subject to change without notice for improvements.
| 0.09 %
| 0.1 %
| 280 mV
| 92 dB
| +0 dB, -3 dB
| 280 mV
| ±10 dB
| 70 W / 70 W
| 70 W
|
| 32, 44.1, 48, 96 kHz
| 0.5 Vp-p
| -15~-21 dBm
| 87.5~108 MHz
| 12.8 dBf
| 20.2 / 45.3 dBf
| 55 / 50 dB
| ±3.0 dB
| 30 dB
4 dB
| 80 dB
| 522~1611 kHz
| 500 µV/m
| 40 dB
230 V ~ 50 Hz
| 200 W
9.5 kg (20.9 lbs)
| 2× 50 W
70 W / 70 W
| 0.5 / 1.0 %
| 440× 141× 358.5 mm (17-3/8× 5-1/2× 14-1/8 inches)
41