Installing The Bag, Basket And Tray; Adjustment Of The Braking Effect; Using The Handbrake; Using The Parking Brake - Invacare Banjo P452E/3 Manual De Instrucciones

Ocultar thumbs Ver también para Banjo P452E/3:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 8
3.5 Installing the Basket and Tray
1. Fitting the basket.
2. Fitting the tray using plastic pins.
1)

3.6 Adjustment of the Braking effect

Two setting screws, one in the brake lever (A) and one in the middle
of the brake cable (B) adjusts the tension of the brake and the applica-
tion of the brake to the user's capability. The braking power increases
and the movement required in the brake lever is reduced when the
setting screws are loosened.
WARNING:
Check the braking effect after height adjustment.
Make sure to tighten the lock nuts after adjustment.
A)
B)
2)

3.7 Using the handbrake

Apply the brakes by pulling both brake handles upwards.

3.8 Using the Parking Brake

Press the brake handles carefully downwards to apply the parking bra-
kes. A distinct click indicates that the brake is in the correct position.
It is important that both the brakes are put into parking position
when they are to be used.
To release the parking brake, pull the brake handle upwards.
24

Publicidad

Tabla de contenido
loading

Tabla de contenido