Battery; Equipment Items; Putting Into Operation; Controls And Operating Notes - Lister 1600-4 Instrucciones De Uso

2.2.3.

Battery

EN
Type designationTy-
penbezeichnung
Type
Voltage
Capacity
2.3.

Equipment Items

1 Clipping Machineand battery1 Pair of Clipping Blades1 Charging station
1 Replacement battery (depending on equipment)1 Special Screwdriver
1 Bottle of Special Lubricating Oil
1 Set of Operating Instructions
1 Transport and Storage Case
1 Wrist strap
3.

Putting into operation

3.1.

Controls and Operating Notes

There are dangers inherent in the improper use of electrical equipment, especially
stockbreeding equipment! Therefore, before using the machine, you should observe
the following accident-prevention measures:
• The mains voltage(charging station) must be the same as that shown on the nameplate.
The machine may only be connected to an AC supply.
• Avoid all contact with the moving clipper blades.
• Even when the machine is switched off, do not handle the area of the clipper blades as
long as the machine is connected to a power source(battery). Always disconnect the power
supply(battery) first when working on the clipper blades/clipper head.
• Avoid touching any machine which is in contact with any liquids. Never clip wet animals.
• Any liquid which has got into the machine will lower the electrical insulation. There is
thenthe danger of an electric shock or short circuit. Only clean the machine when dry
using a brush or the cleaning brush provided.
• An electric cable(charging station)lying loose on the ground for any distance can snag and
become a source of danger. Lay the cable out carefully and safely. Avoid any kinks in the
power cable and prevent it becoming entangled. Animals must not stand on or
• walk across the power cable or get caught in it. Never wrap the power cable around
thecharging station and keep it away from hot surfaces and objects. This may result in
breaks and damage to the insulation. The cable should be regularly checked for damage.
• Switch the machine to OFF (Position 0) beforeremoving the battery.
• Wear suitable work clothes. Do not wear any loose fitting clothing or items of jewellery
which could get caught up in moving machine parts. We would recommend in the stron-
gest terms that protective goggles and ear protectors are worn.
6102
Li-Ion
see nameplate on the battery
see nameplate on the battery
Page 16