Ferroli PREXTHERM N Serie Instrucciones De Uso página 6

1
E Fasten the 2 front "side support brackets" "1".
G Secure the sides at the front and rear.
I
I Fit the control panel to the sides using the tabs "1". Place the rein-
forcement spring "2" between the head of the screw and the tab.
M Fit the covers following the sequence given in point "B".
6
F Place the sides on the boiler shell.
H Fit the wiring protection box "1" using the screws "2" on
the sides, and position the pre-wired control panel.
2
1
PREXTHERM N
1
2
2
1
L Wiring connections to the boiler:
- have the burner connection cables come out of the
bottom of the right-hand side if you want the door
to open to the right or vice versa the left-hand side.
- connect the specifi c connector to the pressure switch
1 and the pressure gauge coupling to the sheath 2.
- insert the thermostat and thermometer bulbs fully
inside the sheath 3, fastening them with the clip.
3